Torque Control Screwdrivers - Insulated 1000 Volts 287 Series From Wiha

Insulated TorqueVario-S Series
10,000 Volt Tested1000 Volt Rated - Meets EN/IEC
ASTM, OSHA, VDE, NFPA, CSA, 10,000 Volt Tested

6 Insulated Torque Adjustable Tools Available
Ranges: 7.5 to 70 in/lbs (+/- 6% of Setting)
and 0.6 to 8.0 Nm (+/- 6% of Setting)
All Tools With Individual Serial Numbers
and Certificates of Calibration Accuracy

Adjustable

Direct Reading
For Accurate
Fast Setting

1000 Volt - Insulated Adjustable Torque Tools TorqueVario^® Calibrated Torque Limiting Tools With Direct Reading Window Scale Standard Torque Blades & Extensions Do Not Work In These Insulated Handles IMPORTANT! Use only Insulated Blades listed Below with these handles
Item No.	Description	Torque Range	Scale Steps	Add To Cart

28724	Insulated Adjustable TorqueVario Handle Includes Blade Holder	7.5 - 20 in-lbs 1000 Volt Rated	0.5 in-lbs	$186.16

28726	Insulated Adjustable TorqueVario Handle Includes Blade Holder	10 - 50 in-lbs 1000 Volt Rated	2 in-lbs	$191.00

28727	Insulated Adjustable TorqueVario Handle Includes Blade Holder	20 - 70 in-lbs 1000 Volt Rated	2 in-lbs	$203.10
28791	Insulated TorqueVario 8 Piece Set Includes 10 - 50 in-lbs Torque Vario Handle With Insulated Blade Holder and Insulated Slotted Blades: 3.5, 4.0, 5.5 Insulated Phillips Blades: #1 & #2 Includes Adjustment Tools & Canvas Storage Pouch			$234.60
28792	Insulated TorqueVario 16 Piece Set Includes 20 - 70 in-lbs Torque Vario Handle With Insulated Blade Holder and Insulated Slotted Blades: 3.5, 4, 5.5, 6.5 Insulated Phillips Blades: #1 & #2 Insulated Square Blades: #1 & #2 Insulated Terminal Blades: #1 & #2 Insulated TORX Blades: T8, 10, 15, 20 Includes Adjustment Tool & Canvas Storage Pouch			$325.18
Insulated Torque Tools - Newton Meter Scaled Insulated 10,000 Volt Tested/ 1000 Volt Rated Adjustable TorqueVario^® Calibrated Torque Limiting Tools
Item No.	Description	Torque Range	Scale Steps	Add To Cart
Nm
28734	Insulated Adjustable TorqueVario Handle And Blade Holder	0.6 to 2 Nm	.05 Nm	$186.16
Nm
28736	Insulated Adjustable TorqueVario Handle And Blade Holder	1 to 5 Nm	.20 Nm	$191.00
Nm
28737	Insulated Adjustable TorqueVario Handle And Blade Holder	2 to 8 Nm	.20 Nm	$203.10
IMPORTANT! Use only Insulated Blades listed Below with these handles

Insulated Blades For Insulated TorqueVario-S Series
Insulated Handles - 1000 volt rated blades
These Blades do not work in Standard Torque Vario, ESD Safe TorqueVario Or TorqFix Tools

"SlimLine" Insulated Blades For Torque Control Reduced Diameter Blades for Improved Access
SlimLine Slotted	10,000 Volt Tested - 1000 Volt Rated					6mm Drive
Item No.	Type	Tip Size	Slim Zone Length	O.A.L	Insulation Diameter	Add
28308	SlimLine Slotted	3.0mm 1/8" / .12"	1.8"	90mm 3.5"	4.1mm 0.161"	$8.72
28309	SlimLine Slotted	4.0mm 5/32" / .16"	1.8"	90mm 3.5"	4.1mm 0.161"	$8.72
28312	SlimLine Slotted	5.5mm 7/32" / .15"	1.8"	90mm 3.5"	6.1mm 0.255"	$8.72
28315	SlimLine Slotted	6.5mm 1/4" / .25"	1.8"	90mm 3.5"	6.1mm 0.255"	$8.72
Due to reduction of steel diameter combined with tool tip geometry not all insulation diameters are able to be fully reduced.See Insulation Diameter Specification.

SlimLine Phillips	10,000 Volt Tested - 1000 Volt Rated					6mm Drive
Item No.	Type	Tip Size	Slim Zone Length	O.A.L	Insulation Diameter	Add
28317	SlimLine Phillips	#1	1.8"	90mm 3.5"	4.1mm 0.161"	$8.72
28319	SlimLine Phillips#1	#2	1.8"	90mm 3.5"	6.1mm 0.255"	$8.72
Due to reduction of steel diameter combined with tool tip geometry not all insulation diameters are able to be fully reduced.See Insulation Diameter Specification.

SlimLine Square	10,000 Volt Tested - 1000 Volt Rated					6mm Drive
Item No.	Type	Tip Size	Slim Zone Length	O.A.L	Insulation Diameter	Add
28346	SlimLine Square	#1	1.8"	90mm 3.5"	4.1mm 0.161"	$8.72
28347	SlimLine Square	#2	1.8"	90mm 3.5"	6.1mm 0.255"	$8.72
Due to reduction of steel diameter combined with tool tip geometry not all insulation diameters are able to be fully reduced.See Insulation Diameter Specification.

SlimLine Terminal	10,000 Volt Tested - 1000 Volt Rated					6mm Drive
Item No.	Type	Tip Size	Slim Zone Length	O.A.L	Insulation Diameter	Add
28327	SlimLine Terminal	#1	1.8"	90mm 3.5"	4.1mm 0.161"	$8.72
28329	SlimLine Terminal	#2	1.8"	90mm 3.5"	6.1mm 0.255"	$8.72
Due to reduction of steel diameter combined with tool tip geometry not all insulation diameters are able to be fully reduced. See Insulation Diameter Specification.

SlimLine Torx	'10,000 Volt Tested - 1000 Volt Rated					6mm Drive
Item No.	Type	Tip Size	Slim Zone Length	O.A.L	Insulation Diameter	Add
28339	SlimLine Terminal	T8	1.8"	90mm 3.5"	4.1mm 0.161"	$8.72
28340	SlimLine Terminal	T10	1.8"	90mm 3.5"	4.1mm 0.161"	$8.72
28341	SlimLine Terminal	T15	1.8"	90mm 3.5"	6.1mm 0.255"	$8.72
28342	SlimLine Terminal	T20	1.8"	90mm 3.5"	6.1mm 0.255"	$8.72

Insulated Blade Holder For Torque Control
28350	Replacement Insulated Blade Holder (this holder now included with all above handles & sets)					$32.98
Due to reduction of steel diameter combined with tool tip geometry not all insulation diameters are able to be fully reduced.

Recommended torque values for screws vary depending on manufacturer,
ALWAYS use the torque specified by the product manufacturer.
Wiha does not endorse or certify any torque values for screws,
information provided is only intended as a general guide line for use.
Never exceed the torque specified by the screw manufacturer.

Torque Control tools are not returnable except for warranty repair/replacment.

Wiha Torque Control Products Index All Torque Handles are Guaranteed to 5000 Cycles or 1 Year of Service
	TorqueVario with Adjustable In-lb Settings 15-80in oz's 5, 5-10 in lbs, 7.5-20, 10- 50, & 20-70 in-lbs
	TorqueFix for Factory Preset in Inch Lb Tools
	Adjustable TorqueVario Tools in Newton Meters
	Insulated Adjustable TorqueVario Tools & Blades
	ESD Safe Adjustable TorqueVario Tools & Blades
	Easy-Torque Economy Presets for +/-10% Values Preset Factory Checked - (No Calibration Certificates)
	Torx & Torx Plus Easy-Torque Drivers With +/-10% Values T5 - T15 and IP5 - IP15
	See Blades & Adaptors For Torque Control Tools
	See Torque Control Sets In Pouch & Metal Box
	TorqueFix T-Handles Presets - Cushion Grips Torque Vario - Adjustable T-Handle 5-14 Nm See Blades & Adaptors For T-Handle Torque Coming Soon Adjustable Torque T-Handle
* Wiha Torque Control Tools Meet ASME B107.14m, EN ISO 6789, BSEN 26789 Specifications, Guaranteed Torque Accuracy to 5000 Cycles/1 year of service. TorqueVario, TorqueFix & Torque-T-handles Have Unique Serial Numbers and Calibration Certificates Torque Control tools are not returnable except for warranty repair/replacement.
* Regarding EasyTorque Easy-Torque Tools do not have certificates of calibration. Easy-Torque presets are guaranteed to hold +/-10% of Torque value to 5000 cycles or 1 year in service. EasyTorque tools are not returnable except for warranty repair/replacement

Order Your Free
Wiha Torque Control
Products Catalog
Full Color Over 200 Products
#99001.wo

*
     See Basics of "What Is Torque"
*
     See Torque Blade & Handle Selection Chart
*
     See Maximum Recommended Torque Values
*
     See Table for Selecting Proper Torque Handle
*

See Index Of All Tool Styles

See Index Of All Screwdriver Styles