26-in-1 Ultra Driver Tradesman
26-in-1 Ultra Driver Tradesman is rated out of 5 by 9.
- Featured on the Today show and this Old House Top Best new Tools of 2017
- Ultra Compact, Ultra Lightweight, Ultra Convenient.
- Saves Time, Fewer Tools to Carry, Less Weight 26 Tips.
- 13 Premium double-ended bits with Phillips, Slotted, TORX, Square, Hex Inch & Metric, Pozi.
- Ergonomic Soft Grip Handle, Locking bit holder.
- Everything you need in one grab and go package.
The Ultra Driver 26inOne.
- 26 Bit Tips, Quick access, the right bit for the job.
- Comfortable Cushion Grip Ergonomic Handle
- Spring driven pop up cartridge for fast bit selection
- High Performance Quick Release Locking Bit Holder
- Hardened and Tempered CVM Tool Steel Bits
- Precision machined for an exact fit.
- All the drivers you need when and where you need them.
- Grab and Go Convenience
Tradesman Tip Sizes Included
- TORX: T10, T15, T20, T25
- Phillips: #0, #1, #2, #3
- Pozidrive: #1 & #2
- Square: #0, #1, #2, #3
- Slotted: 3.0, 4.5, 5.5, 6.5
- Metric Hex: 3.0, 4.0, 5.0, 6.0mm
- Inch Hex 1/8", 9/64, 5/32, 3/16"
|Head Type||slotted, phillips, hex metric, hex inch, torx, square, pozidriv|
|California Residents||Click for Proposition 65 warning|
|Handle Grip Types||Bit Storage in Handle|
|Pieces In Set||26|
|Hex Inch||1/8+9/64, 5/32+3/16|
|Hex Metric||3.0+4.0, 5.0+6.0|
Rated 5 out of 5 by HPeugeot from Great tool, bit holder 71480, ratcheting Very happy with this tool overall. It would be great if the description made clear that there is a compatible bit holder, CentroFix 71480 (https://www.wihatools.com/centrofix-1-4-quick-release-bit-holder) for the double-ended bits that come with this tool. As they are not compatible with most conventional bit holders, it took a while to figure this out! Pros: - Quality - Selection and number of bits you can store in one tool Cons: - No ratchet function on driver. I definitely miss this here compared to other similar tools I've used. - Release mechanism for tool compartment is fiddly, doesn't always open clean.
Date published: 2018-04-10
Rated 3 out of 5 by Maher B. from Great idea, unnecessarily complex Wiha products are normally very stout and well thought out. To have tried numerous screw drivers to include ratcheting and non ratcheting. The Wiha 26-in-1 is made of sturdy plastic, solid shank and is ergonomic. However, their are rubber balls that hold two tabs which keep the spring loaded tube in place. These rubber balls will fall out and don't keep the tabs tight enough to prevent the tube from ejecting out when dropped or slightly grasped when using the driver. Also, the tube has two sets of rubber O-rings which hold the bits. These are also flimsy. I believe a few engineering improvements would make this an excellent driver.
Date published: 2019-04-24
Rated 4 out of 5 by Anonymous from Good for emergency, occasional use. Wiha has a great reputation. I have even heard a Canadian YouTuber, AvE sing their praises, although Wiha is German. The screwdriver is clearly well made, but the holder for the tips in the butt of it keeps popping out during normal screwdriver use. This is not a major problem, just irritating, especially given how frequently it has happened. Great to have on my motorcycle for emergency use, however.
Date published: 2018-09-14
Rated 3 out of 5 by Anonymous from Great Multibit driver I've had one of these in the past but it was stolen along with many other Wiha tools from my truck.A year later and I had really missed that screwdriver, I bought another. The bit carriage is well thought out, bits are secure in the head when using them. The variety of bits that can be used is awesome. My one complaint, the first day using it one of the little clips that keep the carriage in place popped off. The little rubber ball was nowhere to be found! So with one clip holding the carriage down in place, you constantly put pressure on the one functioning clip. The carriage pops up in your hand. Extremely aggravating! So I found a little sliver of foam and cut it into a ball, it keeps the carriage from popping up but it doesn't hold as well. My one complaint.
Date published: 2018-09-06
Rated 5 out of 5 by Anonymous from It's in the handle I have enjoyed this driver so much, its just so handy. My car mechanic had recently helped me press a bearing one of my projects, so as a thank you I gave all six of the mechanics one of the drives. They all love it and had never heard of Wiha. Thank you for the great tools.
Date published: 2018-08-16
Rated 5 out of 5 by Chris D. from Great Screwdriver. This is a very well built, quality tool!! I love the way the bits are retained and will not fall out of the handle while using the tool. If you have ever used a screwdriver from another company that has removable bits chances are you have lost bits because they fall out. Not the case here. The bits themselves hold to the screws very well and wont round off the screw. With so many choices of bits stored in the handle, it is most likely the only screwdriver you will need to have with you.The screwdriver handle is larger than I thought it would be and was a little concerned about that. Turns out that it is actually a good thing. Not only does it make it able to hold all the bits in the handle but allows you to get a very good grip on the screwdriver and put a lot of torque into the work. I am very happy with the tool and will most likely buy 1 or 2 more for my techs. and for the shop tool box.
Date published: 2019-03-29
Rated 5 out of 5 by Anonymous from Husband's favorite tool My husband received this tool for a gift, and hands down, it's his favorite tool! It's convenient, reliable, and easy to change tips for various needs. Highly recommend this product!
Date published: 2018-07-16
Rated 4 out of 5 by William P. from 26 in 1 Tradesman The Tradesman works well, it has all the bits I need working on emission analyzers. The pop up function however has to be assisted to open. This may be to the environment I work in.
Date published: 2018-04-06